FANDOM


Tin(IV) chloride, also known as stannic chloride, is a compound of tin and chlorine with the formula SnCl4. Despite what the name implies, it is not an ionic salt that contains Sn4+ ions, but a covalent compound containing covalent Sn-Cl bonds. Because of this, it has a much lower melting point than typical metal chlorides, and is a colorless liquid at room temperature when anhydrous.

PropertiesEdit

ChemicalEdit

Anhydrous tin(IV) chloride fumes in humid air forming a white smoke of tin(IV) oxide and hydrogen chloride.

SnCl4 + 2H2O —> SnO2 + 4HCl

When the anhydrous species is added to liquid water, it reacts exothermically and forms white crystals of the pentahydrate. Anhydrous tin(IV) chloride is a lewis acid, and is a very useful precursor to organotin compounds.

PhysicalEdit

In the anhydrous state, tin(IV) chloride is a colorless liquid that fumes in contact with humid air. It has a melting point of -34.07°C and a boiling point of 114.15°C. The pentahydrate is a white, crystalline solid. Similarly to aluminum chloride, the anhydrous version isn't obtainable by heating the hydrate, as it decomposes, releasing hydrogen chloride and leaving tin(IV) oxide behind.

AvailabilityEdit

Tin(IV) chloride can only be purchased form chemical suppliers, as it doesn't currently have any uses other than as a chemical reagent.

PreparationEdit

Tin(IV) chloride can be prepared in a home lab setting in a few different ways.

Reaction of tin and chlorineEdit

Tin will react with dry chlorine gas to produce anhydrous tin(IV) chloride. The reaction is very exothermic. Chlorine gas is led from a chlorine generator through a drying tube filled with calcium chloride, or a gas washing bottle containing concentated sulfuric acid. It is then passed over the tin metal. It will react readily with chunks of tin, although higher surface area tin powder would react faster. A flask containing sodium hydroxide is used to absorb excess chlorine gas that doesn't react with the tin. It is recommended that an empty trap vessel is placed between the reaction chamber and the sodium hydroxide to prevent suckback into the reaction vessel.

Pyrolysis of potassium hexachlorostannateEdit

Potassium hexachlorostannate (K2SnCl6), which can be prepared by dissolving tin in aqua regia and adding potassium chloride to the heated solution. Cooling this solution causes rapid crystallization of the K2SnCl6. Strongly heating this salt causes it to decompose into tin(IV) chloride and potassium chloride.

K2SnCl6 —> 2KCl + SnCl4

The tin(IV) chloride boils off and can be condensed.

Oxidation of tin(II) chlorideEdit

Hydrated tin(IV) chloride can be prepared by oxidizing tin(II) chloride in solution using potassium nitrate. This is not a practical procedure for obtaining the anhydrous compound, only the pentahydrate.

ProjectsEdit

HandlingEdit

SafetyEdit

Anhydrous tin(IV) chloride produces very irritating fumes in air, and should be used in a fume hood or at least a very well ventilated area. These precautions do not apply to the pentahydrate.

StorageEdit

Anhydrous tin(IV) chloride should be stored in an air tight container to prevent it from reacting with moisture in the air. The pentahydrate can be stored as a general compound.

DisposalEdit

ReferencesEdit

Relevant Sciencemadness threadsEdit

Small scale preparation of Stannic Chloride (SnCl4) (Describes both procedures for producing anhydrous tin(IV) chloride, with pictures)

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.